NHT Speakers

For those with larger rooms who prefer the placement simplicity and sound of a full frequency point-source speaker, the NHT offers the T6 Tower system.

The T6 combines the Evolution M6 monitor with its own sonically and stylisically matched powered subwoofer, the Evolution B6 bass module. This tower configuration employs four 12" woofer drivers, combining high aesthetic value and full range response -- with output levels required to fill larger spaces -- in one package.

The T6 also offers precise sonic imaging through a re-engineering of NHT's signature technology, Focused Image Geometry. In earlier models, NHT employed this technology structurally, using an angled front baffle to increase the ratio of direct to reflected sound by focusing the musical information toward the listener and improving midrange response. The T6 accomplishes a similar effect by pointing the crossover null at the sidewalls which reduces reflections and provides a wide, three-dimensional sound stage and startling detail.

Sold as a mirror-image pair, B6 modules can be configured to direct bass either outward -- best for home theater uses when televisions or entertainment cabinets are between the towers -- or inward, which can help reinforce bass response.

Each B6 bass module contains two of the same high-quality 12"acoustic suspension woofer as other Evolution subwoofers, for a total of four bass drivers per tower system. Generating adequate bass response in large areas can cause significant heat build up in the woofer. The Evolution woofer features a massive motor structure and an aluminum cone attached to a large aluminum former, which together act as a heat sink to disperse excess energy before heat-generated impedance can increase, which in turn keeps system distortion low, even with high-demand material.

Like the T5, the Evolution T6 tower features a polycarbonate buttress to provide the B6 with a solid mounting platform for the M6 satellite, and includes all the necessary mounting hardware. It also offers built-in wire management that allows the entire tower to connect to the amplifier and crossover from simple near-the-floor connectors located at the back of each B6 woofer module.

Every T6 Tower system comes with two Evolution A1 Amplifiers and an X1 Active Crossover to power and control the B6 subwoofers. A set of solid aluminum stabilizer bars for the bottom of the B6 modules are also included in every T6 package.

Modern and graceful in appearance, the T6 is a truly high performance loudspeaker system capable of great finesse and detail while offering dynamic range that can achieve the sound pressure levels of a live performance. With its level of innovation and sonic capabilities, the NHT Evolution T6 may just be the most advanced tower system ever offered.

Description:

Tower loudspeaker system employing two M6 monitors, B6 bass module mirror image pair, two A1 amplifiers, X1 bass manager/active crossover, mounting brackets, hardware and wire management system included.

System Response:

+/-3dB: 26Hz ? 20kHz.

Subwoofer Power:

500W RMS.

Peak Acoustic Output:

@1M: >111dB.

Input Connectors:

5-way binding posts.

Tower Dimensions/Weight:

47.1"H x 8.25"W x 17.6"D, 99lbs.

Enclosure/Finish:

MDF, Anthracite matte lacquer

Description:

3-way, acoustic suspension design.

Drivers:

(2) 6.5" woofers, 4" mid-range, 1" metal dome tweeter, all drivers magnetically shielded.

Frequency Response:

(+/-3dB): 61Hz - 20kHz.

Description:

Full range (20Hz - 20 kHz), class G, monaural amplifier for general audio use.

Power Rating (RMS):

200W into 8ohms, 250W into 6ohms, 300W into 4ohms.

THD:

<.01% 22Hz - 20kHz.

Description:

Active crossover for use with Evolution U1, U2 subwoofers and T5, T6 tower systems.

Switchable Hi Pass:

50Hz, 80Hz, 110Hz.

Variable Lo Pass:

50Hz - 140Hz.

The U2 is a compact, two-cabinet subwoofer offering the same bass output as the U1, but made to serve different application and room requirements.

An acoustic suspension design, it has been engineered to extend the bass range of our Evolution M5 or M6 monitors, or any other monitors of similar frequency range, with tight, accurate and powerful performance, while adapting to potentially difficult placement and room conditions.

Offering front firing drivers and an unusually compact enclosure size, the U2 modules can be installed in cabinets, on low shelves, or in corners with no compromise in bass output. And in rooms where bass performance is problematic-- too much bass caused by standing waves or too little as a result of cancellation -- the dual U2 enclosures can be placed in asymmetrical positions to help improve response.

The entire U2 system consists of four matched components: two W2 subwoofer enclosures with individual bass drivers, the A1 Monaural Amplifier, and the X1 Active Crossover.

The W2 cabinets feature 12" woofers in compact 14" cubes, each delivering bass down to 25Hz. The woofer is constructed using an aluminum cone attached to an aluminum former (the cylinder on which the voice coil is wound). This assembly acts as a massive heat sink which reduces distortion and heat buildup under demanding loads.

The A1 monaural amplifier deliver 250 watts rms to the W2 enclosures. The A1 is a Class G design, known for efficiency and cooler operation than many other amplifier designs.

The X1 Active Crossover provides fine tuning of the U2 subwoofer system, allowing seamless integration with Evolution and other satellites and helping eliminate many common low frequency problems caused by room interaction.

This unique combination of electronics and high tech double-cabinet woofer design offers tight, articulate bass for music reproduction, the high output and dynamic range needed for the full enjoyment of movie soundtracks, and a smooth and even bass response from anywhere in the listening room.

Description:

Dual W-1 enclosure subwoofer with A1 Amplifier and X1 Active Crossover included.

Drivers:

Two 12" aluminum cone (1 per enclosure), high excursion.

System Power:

250W RMS.

Peak Acoustic Output @1M:

108dB.

Frequency Response:

+/-3dB: 26Hz-140Hz.

Input Connectors:

5-way binding posts.

Description:

Full range (20Hz - 20 kHz), class G,monaural amplifier for general audio use.

Power Rating (RMS):

200W into 8ohms, 250W into 6ohms, 300W into 4ohms.

THD:

<.01% 22Hz - 20kHz.

Description:

Active crossover for use with Evolution U1, U2 subwoofers and T5, T6 tower systems.

Switchable Hi Pass:

50Hz, 80Hz, 110Hz.

Variable Lo Pass:

50Hz - 140Hz.